Solidfloor (TM) - now available at Wood You Like
Installation Manual as training manual

Rather tired and in need of revitalisation parquet floor

DIY conversation in our email inbox: (do you have a question yourself - use this form to ask us)

Old wear pattern is now a "feature"of the floor

Question:

Hello, we have a parquet floor in our hallway that was sanded and varnished 10/12 years ago and is now rather tired and in need of revitalisation, especially since we have rearranged the furniture and the old wear pattern is now a "feature"of the floor.

Obviously we could just sand it down and do the same again, but I would like to know whether we could apply a wax finish instead once we have stripped it back - it is a 1950s house and I think the flooring is oak; I am planning on doing the job myself, but would appreciate some expert guidance as to whether a change of finish will produce good (or hopefully even better!) results.

Many thanks, Sandra A

The 7 Steps

Hi Sandra

Thank you for your question. We are "oil" people ourselves and know from experience an HardWaxOil finish will bring out your floor's character much better than varnish, plus will be easier to keep beautiful without too much trouble.
Have you read through our 7 Easy Steps?:

What materials?

Yes, I have read the Easy Steps - I think I would probably join in on step 5 as our floor is perfectly sound, just worn.
I really wanted to check that the varnish can be sufficiently removed by sanding and that it hasn't penetrated deep down in the wood in a way that would stop oil soaking in should we decide to change the finish. It as a relatively small area - about 14 sq m - what tools and materials (apart from hiring sanders) would you recommend we use?

Recommended products

Saicos HardWaxOil and Wax-care with simple polish/hwo applicator

Varnish can normally be sanded off rather easy - you could even decide to start with grit 80 instead of 40. Try this out, it will save you time and sanding belts.

Saicos HardWaxOil is a very good product, and comes in 4 sheens (Satin-mat the most popular one still)

To apply the two coats of HWO you can use our polish applicator

If there are obvious gaps between individual blocks you could decide to fill these, using a wood-filler:

Hope this helps?

Comments

The comments to this entry are closed.